Photography
| Programming NWR Radio Receiver |
|
| Written by Administrator | |
|
* When an NWS office broadcasts a warning, watch or non-weather emergency, it also broadcasts a digital SAME code that may be heard as a very brief static burst, depending on the characteristics of the receiver. This SAME code contains the type of message, county(s) affected, and message expiration time. * A programmed NWR SAME receiver will turn on for that message, with the listener hearing the 1050 Hz warning alarm tone as an attention signal, followed by the broadcast message. * At the end of the broadcast message, listeners will hear a brief digital end-of-message static burst followed by a resumption of the NWR broadcast cycle. SAME is also used in the Emergency Alert System (EAS). See EAS fact sheet for more information. Using SAME, broadcasters may receive NWR warning messages for rebroadcast in accordance with EAS rules. Programming Your Receiver To program NWR SAME receivers with the proper county(s) and marine area(s) of choice, you need to know the 6-digit SAME code number(s) for that county(s). Once you have the number, follow the directions supplied the manufacturer of your NWR SAME receiver for programming. The number is available two ways: * Online at the United States and Territories Table. * By telephone at 1-888-NWR-SAME (1-888-697-7263) for a voice menu. Description of Columns in State Tables From the United States and Territories Table, clicking on a state or territory will bring up a table of eight columns. 1. State identification Column: Identifies the state for the county listed in column two. 2. Counties Column: Counties ins a specific state listed alphabetically. If a county is covered by more than one NWR transmitter, the county will be listed on multiple rows. If a county is not covered, it will be listed with a remark of "--No NWR Coverage--" in the Transmitter Column (4). 3. NWR SAME Code Column: This 6-digit sequence uniquely describes each county. For coding of a whole county, the first digit is zero. For coding of a part of a county, the first digit is a non-zero number. The 2nd through 6th digits use the Federal Information Processing Standard (FIPS). The 2nd and 3rd digits are the 2-digit state/equivalent territory identifier; the last three digits are the county or equivalent area identifier. 4. Transmitter Location Column: City and state of the NWR transmitter covering the county. Some counties are covered by a transmitter in an adjacent state. 5. Transmitter Frequency Column: Frequency the transmitter broadcasts on. There are seven frequencies (in MHz) used throughout the NWR network: 162.400, 162.425, 162.450, 162.475, 162.500, 162.525, 162.550. 6. Transmitter Call Sign Column: Station call sign of the transmitter. 7. Transmitter Power Column: Peak power of the transmitter in watts. 8. Remarks Column: Used when a transmitter covers only part of a county. |
|
| Last Updated ( Sunday, 06 July 2008 ) |
| Next > |
|---|
